- Louisville, KY
- Cincinnati, OH
- Columbus, OH
- Lexington, KY
- Cleveland, OH
For more than 20 years, Trinity Consultants has assisted facilities in the aerospace industry with regulatory compliance and environmental management issues.
Trinity has a long history of assisting facilities with their regulatory compliance and environmental management systems.
Trinity helps chemical and pharmaceutical manufacturers to achieve regulatory and environmental compliance.
Trinity has assisted clients with nearly 500 power-related projects, offering an array of services.
Due to their nature, “general manufacturing” facilities are often faced with reviewing a wide range of regulations to determine applicability.
Trinity provides a variety of services to government entities, including environmental permitting and compliance management.
Trinity Consultants has long been committed to assisting lime and aggregates facilities with their regulatory compliance needs.
Trinity takes pride in understanding the regulatory issues affecting our clients’ facilities and their industry.
Oil and gas facilities must contend with a variety of regulatory compliance and environmental management demands.
Trinity helps petroleum refineries to achieve compliance with complex environmental regulatory requirements.
Trinity Consultants has long been committed to assisting cement facilities with their regulatory compliance and environmental management needs.
Trinity has extensive experience assisting the pulp and paper industry with its regulatory compliance and environmental management requirements.
Railroads are faced with rapidly evolving state, regional, and federal regulatory framework in the United States.
For more than 25 years, Trinity Consultants has assisted facilities in the semiconductor industry.
Trinity Consultants has performed nearly 800 environmental permitting and compliance projects for clients with terminal operations, providing cost-effective, timely solutions that enhance compliance while maintaining operational flexibility.
For nearly 30 years, Trinity Consultants has assisted facilities such as those in the highly regulated wood products industry.
On May 17, 2018, EPA Administrator Scott Pruitt signed a regulatory impact analysis requesting comments on proposed changes to the Risk Management Program (RMP) Amendments Rule. The original amendment was published to the Federal Register in January »
The NDEQ has implemented a new policy detailing how trials of changes to facility processes or controls will be evaluated pursuant to the Nebraska Administrative Code Title 129, Chapter 34 - Emission Sources; Testing; Monitoring. The "Source Trial »
Trinity Consultants recently opened an office in Cheyenne, Wyoming under the leadership of former Wyoming regulator Lori Bocchino. This marks the third new Trinity office in 2018 and the latest addition to Trinity's more than 50 offices across the »
IntroductionIn September 2015, the International Organization for Standardization published an updated version of the ISO 14001 environmental management system (EMS) standard. The revised standard (ISO 14001:2015) requires that current certificate »
Leak Detection and Repair (LDAR) involves finding facility components that are leaking and fixing them. The U.S. Environmental Protection Agency (EPA) has a long history of regulating industries (such as petroleum refining and chemical »
Trinity's Environmental Quarterly (EQ) magazine covers environmental regulatory developments as well as topics related to corporate environmental performance.
all issues from 2009
These papers, presentations, and articles were authored by the staff of Trinity Consultants for presentation at various conferences.
all papers & presentations
Since its founding in 1974, Trinity has expanded its geographic footprint and breadth of services. We attribute our continued growth to a focus on cornerstone values of top-notch technical performance and excellence in client service.
Trinity teaches courses on EHS auditing, CDP reporting, EHS risk management, sustainability reporting, ISO 14001, and life cycle analysis for EHS professionals.
This 1-day course is for industrial corporate and facility environmental personnel responsible for air permitting and compliance audits. The course covers general auditing concepts and practices, a brief overview of air regulations and permitting requirements, how to prepare and complete an air compliance audit, and documenting and handling audit findings. The course includes a review of example audit work documents, dissection of an air permit for auditing purposes, and group exercises.
|Classroom||Jul 19, 2018 - 8:00 AM - 5:00 PM||Philadelphia, PA|
|Classroom||Feb 07, 2019 - 8:00 AM - 5:00 PM||Orlando, FL|
This one-day course is for environmental and sustainability professionals who plan to disclose carbon and energy data to CDP’s Climate Change Program and/or Supply Chain Program. Now more than a decade old, CDP has emerged as the global system enabling companies and cities to measure, disclose, manage and share vital information regarding environmental assets.
The course is intended for both new and existing CDP reporters and provides a compelling case for disclosure. Instructors will review techniques for optimizing the emissions quantification process, obtaining verification, and estimating payback for emissions mitigation. Selected case studies will be presented to demonstrate leadership in the reporting process and how organizations can benefit from the associated transparency among stakeholder groups.
|Classroom||Dec 05, 2018 - 8:00 AM - 5:00 PM||Orlando, FL|
|Classroom||Jan 29, 2019 - 8:00 AM - 5:00 PM||Charlotte, NC|
|Classroom||Feb 26, 2019 - 8:00 AM - 5:00 PM||Phoenix, AZ|
|Classroom||May 09, 2019 - 8:00 AM - 5:00 PM||Chicago, IL|
This 1-day course for EH&S and business risk managers reveals how to improve corporate performance through more effective management of EH&S, sustainability, and carbon risks and opportunities. The course focuses on business risk management guidelines and standards that companies use to identify, assess, and manage risks to achieve business objectives, including ISO 31000, COSO enterprise risk management, business continuity management (ISO 22301), and others. More traditional means for EHS risk management are addressed as well (e.g., ISO 14001 aspects/impacts analysis, root cause analysis). Course completion will enable attendees to:
|Classroom||Oct 24, 2018 - 8:00 AM - 5:00 PM||Pittsburgh, PA|
|Classroom||Feb 28, 2019 - 8:00 AM - 5:00 PM||Orlando, FL|
This 1-day course is designed for individuals who conduct or plan to conduct internal EHS audits. This course will be applicable to any type of EHS regulatory or management system audit. Examples of these techniques will include some regulatory content; however, the emphasis of the course is auditing techniques and does not cover comprehensive regulatory information. Course topics that are invaluable to EHS auditors include: auditor standards of conduct, ethics, pre-audit activities, on-site audit activities, and post-audit activities. Additional discussion will cover conflicts of interest, interviewing techniques, how to write findings, and how to handle difficult situations.
|Classroom||Sep 18, 2018 - 8:00 AM - 5:00 PM||Atlanta, GA|
|Classroom||Feb 12, 2019 - 8:00 AM - 5:00 PM||Boston, MA|
This 1-day course provides EH&S and sustainability/corporate responsibility managers, directors, and executives with insight into the complexity of "sustainability" reporting and the value and challenges to verifying reported sustainability data. The course covers reporting and verification of GHG emissions, applicable standards and indices, including ISO and accounting standards, the Global Reporting Initiative, SEC and international disclosure requirements, Dow Jones Sustainability Index, and other indices. The course includes lectures, case studies, and class group exercises to facilitate understanding.
|Classroom||Dec 04, 2018 - 8:00 AM - 5:00 PM||Atlanta, GA|
|Classroom||Apr 04, 2019 - 8:00 AM - 5:00 PM||Denver, CO|
This new 1-day course provides a comprehensive review of the steps associated with implementing a best-in-class ISO 14001 Environmental Management System (EMS). The course also addresses how to make effective use of an EMS as the starting point for launching sustainability initiatives, how to manage EH&S data effectively through the use of information technology, and how to streamline the process for reporting performance metrics.
|Classroom||Aug 23, 2018 - 8:00 AM - 5:00 PM||Chicago, IL|
|Classroom||Jan 15, 2019 - 8:00 AM - 5:00 PM||Atlanta, GA|
|Classroom||Mar 12, 2019 - 8:00 AM - 5:00 PM||Seattle, WA|
|Classroom||May 23, 2019 - 8:00 AM - 5:00 PM||Dallas, TX|
This new 2-day course provides a comprehensive review of the steps associated with implementing a best-in-class RC 14001 or RCMS addressing environmental, health, safety and security (EHSS) concerns. The course will contrast and compare RC 14001 and RCMS, addresses how to make effective use of Responsible Care as the starting point for launching EHSS initiatives. Using the Technical Standards, the course will discuss:
|Classroom||Jan 08 - 09, 2019 - 8:00 AM - 5:00 PM||Charleston, SC|
|Classroom||Mar 05 - 06, 2019 - 8:00 AM - 5:00 PM||Irvine, CA|
|Classroom||Apr 30 - 01, 2019 - 8:00 AM - 5:00 PM||Houston, TX|
This one-day workshop will instruct students on how to develop an effective EHS management system audit program and conduct value-added EHS management system audits with respect to ISO 14001 OHSAS 18001 requirements. The course is designed for EHS managers and related staff at organizations that have implemented an EHS management system and need to train an internal audit team.
|Classroom||Feb 12, 2019 - 8:00 AM - 5:00 PM||Dallas, TX|
|Classroom||Apr 23, 2019 - 8:00 AM - 5:00 PM||Princeton, NJ|
The OHSAS 18001 standard (to be replaced by ISO 45001 in 2018) establishes globally accepted requirements for an Occupational Health & Safety Management System (OHSMS). Each organization’s OHSMS needs to identify legal requirements, work to achieve continuous improvement through objectives and programs, evaluate risks and hazards, control risks of the organization (including procurement and contractors), evaluate their compliance, monitor and measure their conformance, as well as audit and review their results. This course provides attendees with a thorough insight into OHSMS requirements and the anticipated upcoming changes to the OHSAS 18001 standard. Attendees will learn how the OHSAS 18001 and ISO 45001 standards can be interpreted and applied in a variety of different business/industry sectors.
|Classroom||Nov 01, 2018 - 8:00 AM - 5:00 PM||Phoenix, AZ|
This 1-day course introduces attendees to key steps in conducting a life cycle analysis (LCA) and how to ensure relevant data are gathered and analyzed. It also addresses emerging protocols for determining product carbon footprints, developing environmental product declarations, establishing an environmentally preferred purchasing program, and introduces commercially available tools for conducting an LCA. Attendees are introduced to a typical LCA framework as outlined in the ISO 14040 series and case examples illustrate how LCAs are used for organizational sustainability initiatives. Attendees learn to:
|Classroom||Aug 24, 2018 - 8:00 AM - 5:00 PM||Chicago, IL|
|Classroom||Dec 06, 2018 - 8:00 AM - 5:00 PM||Orlando, FL|
This 1-day course is designed for individuals who audit or plan to audit compliance with waste management regulations. The course covers such essential topics as auditing protocols and tools, waste auditing resources, audit policies and incentives, an overview and review of waste regulations, physical features to inspect, records to review, evaluation procedures, and common findings. The course format includes auditing exercises based on situations typically encountered in many waste audits.
|Classroom||Jul 17, 2018 - 8:00 AM - 5:00 PM||Philadelphia, PA|
|Classroom||Feb 06, 2019 - 8:00 AM - 5:00 PM||Orlando, FL|
This 1-day course is designed for individuals who audit or plan to audit facilities for compliance with Clean Water Act (CWA) programs. The course covers such essential topics as auditing protocols and tools, water auditing resources, audit policies and incentives, an overview and review of CWA programs, physical features to inspect, records to review, evaluation procedures, and common findings. The course format includes auditing exercises based on situations typically encountered in many water audits. Course completion will enable attendees to:
|Classroom||Jul 18, 2018 - 8:00 AM - 5:00 PM||Philadelphia, PA|
|Classroom||Feb 05, 2019 - 8:00 AM - 5:00 PM||Orlando, FL|