- Columbus, OH
- Tempe, AZ
- Albany, NY
- Pittsburgh, PA
- Salt Lake City, UT
For more than 20 years, Trinity Consultants has assisted facilities in the aerospace industry with regulatory compliance and environmental management issues.
Trinity has a long history of assisting facilities with their regulatory compliance and environmental management systems.
Trinity helps chemical and pharmaceutical manufacturers to achieve regulatory and environmental compliance.
Trinity has assisted clients with nearly 500 power-related projects, offering an array of services.
Due to their nature, “general manufacturing” facilities are often faced with reviewing a wide range of regulations to determine applicability.
Trinity provides a variety of services to government entities, including environmental permitting and compliance management.
Trinity Consultants has long been committed to assisting lime and aggregates facilities with their regulatory compliance needs.
Trinity takes pride in understanding the regulatory issues affecting our clients’ facilities and their industry.
Oil and gas facilities must contend with a variety of regulatory compliance and environmental management demands.
Trinity helps petroleum refineries to achieve compliance with complex environmental regulatory requirements.
Trinity Consultants has long been committed to assisting cement facilities with their regulatory compliance and environmental management needs.
Trinity has extensive experience assisting the pulp and paper industry with its regulatory compliance and environmental management requirements.
Railroads are faced with rapidly evolving state, regional, and federal regulatory framework in the United States.
For more than 25 years, Trinity Consultants has assisted facilities in the semiconductor industry.
Trinity Consultants has performed nearly 800 environmental permitting and compliance projects for clients with terminal operations, providing cost-effective, timely solutions that enhance compliance while maintaining operational flexibility.
For nearly 30 years, Trinity Consultants has assisted facilities such as those in the highly regulated wood products industry.
Under the presidential directive regarding the streamlining of regulatory permitting requirements, the U.S. EPA is currently reviewing the New Source Review (NSR) program to identify opportunities for improvement. On December 8, 2017, EPA »
On January 16, 2018, the New Jersey Department of Environmental Protection (NJDEP) adopted new rulemaking (originally proposed on August 7, 2017) in the NJ register titled, “Air Pollution Control: Air Emission Control and Permitting Exemptions, HAP »
Trinity Consultants, Inc.® (Trinity), an international environmental, health, and safety (EHS) consulting firm that specializes in industrial air quality issues, announces that it has acquired QSEM Solutions (QSEM). QSEM is an environmental »
IntroductionIn September 2015, the International Organization for Standardization published an updated version of the ISO 14001 environmental management system (EMS) standard. The revised standard (ISO 14001:2015) requires that current certificate »
Are you one of the many organizations that made early investments in the EHS management information system (EMIS) marketplace? Is your EMIS deployment starting to feel outdated, underutilized, or simply out of touch with your organization's »
Trinity's Environmental Quarterly (EQ) magazine covers environmental regulatory developments as well as topics related to corporate environmental performance.
all issues from 2009
These papers, presentations, and articles were authored by the staff of Trinity Consultants for presentation at various conferences.
all papers & presentations
Since its founding in 1974, Trinity has expanded its geographic footprint and breadth of services. We attribute our continued growth to a focus on cornerstone values of top-notch technical performance and excellence in client service.
This 2-day course will provide participants with an in-depth understanding of common source term calculation methods and impact analysis models in order to evaluate potential hazards (including toxics, fires, and explosions) due to accidental release of chemicals under various situations. The technical methods and models to be discussed and used during the course are recognized globally and used routinely in the United States to fulfill a variety of regulatory requirements (e.g.,risk management planning, emergency response and management, and process safety management). The course will also include hands-on modeling exercises using BREEZE Incident Analyst. Upon completion of the course, attendees will:
|Classroom||Nov 01 - 02, 2018 - 8:00 AM - 5:00 PM||Dallas, TX|
Trinity Consultants offers this 2 day course to provide hands-on instruction on the use of AERMOD, the U.S. EPA's preferred computer model recommended for estimation of ambient impacts of air pollutants emitted from industrial sources. This course reviews the scientific theory behind these dispersion models with an emphasis on formulating and conducting an air quality analysis from start to finish utilizing the refined model options of AERMOD, its meteorological processor AERMET, and terrain processor AERMAP. During the course, students will use BREEZE® modeling software to analyze case studies and gain practical experience in processing meteorological and geophysical data and source inputs to the models, running and analyzing model output, and post-processing results to visualize and document predicted impacts. Course completion will enable attendees to:
|Classroom||Mar 01 - 02, 2018 - 8:00 AM - 5:00 PM||St. Louis, MO|
|Classroom||Apr 26 - 27, 2018 - 8:00 AM - 5:00 PM||Boston, MA|
|Classroom||Oct 18 - 19, 2018 - 8:00 AM - 5:00 PM||New Orleans, LA|
This intensive 2-day course is designed for entry level engineers, dispersion modelers, and meteorologists or others wanting to deepen their understanding of air dispersion modeling principles. Concise lectures supplemented by multi-media example problem sets, a short hands-on introduction to computer-based modeling software, and group discussions are used to maximize comprehension. Students learn how models incorporate the effects of transport and dispersion, atmospheric turbulence, stack characterization, building downwash, and terrain impacts with emphasis on U.S. EPA models such as AERMOD, AERSCREEN, and a brief introduction to CALPUFF, CAMx, and CMAQ. Participants learn about:
|Classroom||Feb 27 - 28, 2018 - 8:00 AM - 5:00 PM||St. Louis, MO|
|Classroom||Apr 24 - 25, 2018 - 8:00 AM - 5:00 PM||Boston, MA|
|Classroom||Oct 16 - 17, 2018 - 8:00 AM - 5:00 PM||New Orleans, LA|
This 3-day course focuses on the fundamentals of air dispersion modeling, air dispersion modeling with AERMOD and CALPUFF, and accidental release modeling with BREEZE Incident Analyst. It provides hands-on instruction with all of these programs to those who wish to use the models, sharpen their existing modeling skills, or better understand results prepared by others. It is a combination of the AERMOD Modeling Computer Lab and Accidental Release Modeling Workshop with BREEZE Incident Analyst courses, with additional focus on developing a strong understanding of model fundamentals. All attendees who register for this course will receive a complimentary 30-day trial of BREEZE AERMOD, CALPUFF, Incident Analyst, and the post-processing program (3D Analyst).
|Classroom||Mar 25 - 27, 2018 - 8:00 AM - 5:00 PM||Dubai, U.A.E.|
|Classroom||Apr 11 - 13, 2018 - 8:00 AM - 5:00 PM||Milan, Italy|
|Classroom||Aug 08 - 10, 2018 - 8:00 AM - 5:00 PM||Kuala Lumpur, Malaysia|
|Classroom||Sep 12 - 14, 2018 - 8:00 AM - 5:00 PM||Seoul, South Korea|
This 3-day course is designed for environmental professionals with little dispersion modeling experience who wish to use the AERMOD model or to better understand AERMOD results prepared by others. It is similar to the two-day AERMOD Modeling Computer Lab course, with additional focus on developing a strong understanding of model fundamentals. Course topics include Gaussian model behavior, source characterization, building and terrain data, and results interpretation. The course includes hands-on modeling exercises and interactive lecture sessions. Course completion will enable attendees to:
|Classroom||Jun 06 - 08, 2018 - 8:00 AM - 5:00 PM||Los Angeles, CA|
|Classroom||Oct 10 - 12, 2018 - 8:00 AM - 5:00 PM||London, United Kingdom|
|Classroom||Nov 07 - 09, 2018 - 8:00 AM - 5:00 PM||Chicago, IL|